Liquid for degreasing and cleaning hydraulic circuit.
Compound specially formulated to eliminate biofilm that forms in the circuits (pipes) of spas and hot tubs.
Properties:
Appearance: Liquid.
Color: Colorless.
Density: 0.90 - 0.98 g/cm³.
PH: 10 – 11.
Dosage and instructions for use:
Fill the spa or hot tub with water to about 2 to 4 inches above the dispensing nozzles. You can use the same bath water.
Add an entire bottle (500 ml) of Biofilm Cleaner to remove biofilm from spas or hot tubs between 1,000 and 3,000 liters.
Remove the filter cartridges before starting cleaning and start the filtration and massage pump for approximately 30 minutes.
Once cleaning is complete, the spa or hot tub must be emptied and refilled with clean water to rinse, activating both pumps (filtration and massage) for 1 to 2 minutes. After this time, empty the glass again.
Finally, place the cartridge (new or clean) back into the filter and fill with clean water with disinfectant (chlorine or bromine).
Bathing during the cleaning process is prohibited.
A spa or hot tub should be cleaned about 3 to 4 times a year.
To be successful your content needs to be useful to your readers.
Start with the customer – find out what they want and give it to them.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
